IR Rubber vs. PPS
IR rubber belongs to the thermoset elastomers (rubber) classification, while PPS belongs to the thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is IR rubber and the bottom bar is PPS.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.0 | |
| 1.3 to 1.7 |
| Elongation at Break, % | 600 | |
| 2.5 to 11 |
| Glass Transition Temperature, °C | -70 | |
| 190 to 290 |
| Specific Heat Capacity, J/kg-K | 1550 | |
| 910 to 1000 |
| Strength to Weight: Axial, points | 5.6 | |
| 16 to 37 |
| Strength to Weight: Bending, points | 17 | |
| 30 to 52 |
| Tensile Strength: Ultimate (UTS), MPa | 19 | |
| 75 to 190 |