LCP vs. EMA
Both LCP and EMA are thermoplastics. There are 6 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is LCP and the bottom bar is EMA.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.6 | |
| 0.94 |
| Elongation at Break, % | 1.0 to 3.0 | |
| 800 |
| Melting Onset (Solidus), °C | 280 | |
| 78 |
| Strength to Weight: Axial, points | 33 to 43 | |
| 2.4 |
| Strength to Weight: Bending, points | 45 to 56 | |
| 9.5 |
| Tensile Strength: Ultimate (UTS), MPa | 180 to 230 | |
| 8.0 |