LCP vs. PAS
Both LCP and PAS are thermoplastics. There are 12 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown.
For each property being compared, the top bar is LCP and the bottom bar is PAS.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 11 to 24 | |
2.7 |
Elongation at Break, % | 1.0 to 3.0 | |
40 |
Flexural Modulus, GPa | 9.0 to 23 | |
2.8 |
Flexural Strength, MPa | 160 to 320 | |
110 |
Tensile Strength: Ultimate (UTS), MPa | 180 to 230 | |
83 |
Thermal Properties
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 240 to 270 | |
200 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 to 1.6 | |
1.4 |
Limiting Oxygen Index (LOI), % | 35 | |
33 |
Common Calculations
Stiffness to Weight: Axial, points | 4.4 to 8.9 | |
1.1 |
Stiffness to Weight: Bending, points | 51 to 65 | |
34 |
Strength to Weight: Axial, points | 33 to 43 | |
17 |
Strength to Weight: Bending, points | 45 to 56 | |
31 |