LCP vs. RPU
LCP belongs to the thermoplastics classification, while RPU belongs to the thermoset plastics. There are 12 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown.
For each property being compared, the top bar is LCP and the bottom bar is RPU.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 11 to 24 | |
2.2 |
Elongation at Break, % | 1.0 to 3.0 | |
90 |
Flexural Modulus, GPa | 9.0 to 23 | |
2.0 |
Flexural Strength, MPa | 160 to 320 | |
83 |
Tensile Strength: Ultimate (UTS), MPa | 180 to 230 | |
60 |
Thermal Properties
Maximum Temperature: Decomposition, °C | 520 | |
270 |
Specific Heat Capacity, J/kg-K | 1020 to 1200 | |
1750 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 to 1.6 | |
1.2 |
Common Calculations
Stiffness to Weight: Axial, points | 4.4 to 8.9 | |
1.0 |
Stiffness to Weight: Bending, points | 51 to 65 | |
36 |
Strength to Weight: Axial, points | 33 to 43 | |
14 |
Strength to Weight: Bending, points | 45 to 56 | |
28 |