LDPE vs. PMP
Both LDPE and PMP are thermoplastics. There are 15 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is LDPE and the bottom bar is PMP.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 0.3 | |
1.1 |
Tensile Strength: Ultimate (UTS), MPa | 7.0 | |
24 |
Thermal Properties
Glass Transition Temperature, °C | -130 | |
30 |
Melting Onset (Solidus), °C | 110 | |
230 |
Specific Heat Capacity, J/kg-K | 2300 | |
1750 |
Thermal Conductivity, W/m-K | 0.36 | |
0.17 |
Thermal Expansion, µm/m-K | 220 | |
120 |
Electrical Properties
Dielectric Constant (Relative Permittivity) At 1 Hz | 2.3 | |
2.1 |
Otherwise Unclassified Properties
Density, g/cm3 | 0.92 | |
0.83 |
Common Calculations
Stiffness to Weight: Axial, points | 0.18 | |
0.74 |
Stiffness to Weight: Bending, points | 24 | |
41 |
Strength to Weight: Axial, points | 2.1 | |
8.0 |
Strength to Weight: Bending, points | 8.8 | |
22 |
Thermal Diffusivity, mm2/s | 0.17 | |
0.12 |
Thermal Shock Resistance, points | 7.6 | |
13 |