MakeItFrom.com
Menu (ESC)

M1A Magnesium vs. C52100 Bronze

M1A magnesium belongs to the magnesium alloys classification, while C52100 bronze belongs to the copper alloys. There are 24 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is M1A magnesium and the bottom bar is C52100 bronze.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
110
Poisson's Ratio 0.29
0.34
Shear Modulus, GPa 18
41
Tensile Strength: Ultimate (UTS), MPa 230
380 to 800

Thermal Properties

Latent Heat of Fusion, J/g 350
200
Maximum Temperature: Mechanical, °C 95
180
Melting Completion (Liquidus), °C 610
1030
Melting Onset (Solidus), °C 580
880
Specific Heat Capacity, J/kg-K 990
370
Thermal Conductivity, W/m-K 150
62
Thermal Expansion, µm/m-K 26
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
13
Electrical Conductivity: Equal Weight (Specific), % IACS 190
13

Otherwise Unclassified Properties

Base Metal Price, % relative 12
34
Density, g/cm3 1.7
8.8
Embodied Carbon, kg CO2/kg material 24
3.4
Embodied Energy, MJ/kg 160
55
Embodied Water, L/kg 970
370

Common Calculations

Stiffness to Weight: Axial, points 15
7.0
Stiffness to Weight: Bending, points 71
18
Strength to Weight: Axial, points 38
12 to 25
Strength to Weight: Bending, points 49
13 to 22
Thermal Diffusivity, mm2/s 88
19
Thermal Shock Resistance, points 13
14 to 28

Alloy Composition

Calcium (Ca), % 0 to 0.3
0
Copper (Cu), % 0 to 0.050
89.8 to 93
Iron (Fe), % 0
0 to 0.1
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 97.2 to 98.8
0
Manganese (Mn), % 1.2 to 2.0
0
Nickel (Ni), % 0 to 0.010
0
Phosphorus (P), % 0
0.030 to 0.35
Silicon (Si), % 0 to 0.1
0
Tin (Sn), % 0
7.0 to 9.0
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.5