NEMA Laminate vs. PTFE
NEMA laminate belongs to the thermoset plastics classification, while PTFE belongs to the thermoplastics. There are 10 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is NEMA laminate and the bottom bar is PTFE.
Metric UnitsUS Customary Units
Material Properties
| Compressive (Crushing) Strength, MPa | 190 to 360 | |
| 6.9 to 24 |
| Density, g/cm3 | 1.3 to 1.9 | |
| 2.1 to 2.3 |
| Flexural Modulus, GPa | 6.4 to 18 | |
| 0.4 to 1.3 |
| Flexural Strength, MPa | 87 to 340 | |
| 13 to 50 |
| Maximum Temperature: Mechanical, °C | 120 to 200 | |
| 260 to 270 |
| Strength to Weight: Axial, points | 8.3 to 40 | |
| 1.7 to 3.2 |
| Strength to Weight: Bending, points | 17 to 50 | |
| 5.7 to 8.7 |
| Tensile Strength: Ultimate (UTS), MPa | 55 to 260 | |
| 13 to 25 |
| Thermal Expansion, µm/m-K | 9.0 to 20 | |
| 110 to 120 |
| Water Absorption After 24 Hours, % | 0.17 to 3.5 | |
| 0.0093 to 0.050 |