MakeItFrom.com
Menu (ESC)

Nickel 30 vs. EN AC-44000 Aluminum

Nickel 30 belongs to the nickel alloys classification, while EN AC-44000 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is nickel 30 and the bottom bar is EN AC-44000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210
71
Elongation at Break, % 34
7.3
Fatigue Strength, MPa 200
64
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 82
27
Tensile Strength: Ultimate (UTS), MPa 660
180
Tensile Strength: Yield (Proof), MPa 270
86

Thermal Properties

Latent Heat of Fusion, J/g 320
560
Maximum Temperature: Mechanical, °C 1020
170
Melting Completion (Liquidus), °C 1480
590
Melting Onset (Solidus), °C 1430
590
Specific Heat Capacity, J/kg-K 450
910
Thermal Conductivity, W/m-K 10
140
Thermal Expansion, µm/m-K 13
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.5
36
Electrical Conductivity: Equal Weight (Specific), % IACS 1.6
130

Otherwise Unclassified Properties

Base Metal Price, % relative 60
9.5
Density, g/cm3 8.5
2.5
Embodied Carbon, kg CO2/kg material 9.4
7.8
Embodied Energy, MJ/kg 130
150
Embodied Water, L/kg 290
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
11
Resilience: Unit (Modulus of Resilience), kJ/m3 180
51
Stiffness to Weight: Axial, points 14
16
Stiffness to Weight: Bending, points 23
55
Strength to Weight: Axial, points 22
20
Strength to Weight: Bending, points 20
28
Thermal Diffusivity, mm2/s 2.7
61
Thermal Shock Resistance, points 18
8.4

Alloy Composition

Aluminum (Al), % 0
87.1 to 90
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 28 to 31.5
0
Cobalt (Co), % 0 to 5.0
0
Copper (Cu), % 1.0 to 2.4
0 to 0.050
Iron (Fe), % 13 to 17
0 to 0.19
Magnesium (Mg), % 0
0 to 0.45
Manganese (Mn), % 0 to 0.030
0 to 0.1
Molybdenum (Mo), % 4.0 to 6.0
0
Nickel (Ni), % 30.2 to 52.2
0
Niobium (Nb), % 0.3 to 1.5
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 0.8
10 to 11.8
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.15
Tungsten (W), % 1.5 to 4.0
0
Zinc (Zn), % 0
0 to 0.070
Residuals, % 0
0 to 0.1