MakeItFrom.com
Menu (ESC)

Nickel 690 vs. 5088 Aluminum

Nickel 690 belongs to the nickel alloys classification, while 5088 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is nickel 690 and the bottom bar is 5088 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 3.4 to 34
29
Fatigue Strength, MPa 180 to 300
180
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 79
25
Shear Strength, MPa 420 to 570
200
Tensile Strength: Ultimate (UTS), MPa 640 to 990
310
Tensile Strength: Yield (Proof), MPa 250 to 760
150

Thermal Properties

Latent Heat of Fusion, J/g 320
390
Maximum Temperature: Mechanical, °C 1010
200
Melting Completion (Liquidus), °C 1380
640
Melting Onset (Solidus), °C 1340
540
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 14
120
Thermal Expansion, µm/m-K 14
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.5
29
Electrical Conductivity: Equal Weight (Specific), % IACS 1.6
98

Otherwise Unclassified Properties

Base Metal Price, % relative 50
9.5
Density, g/cm3 8.3
2.7
Embodied Carbon, kg CO2/kg material 8.2
9.0
Embodied Energy, MJ/kg 120
150
Embodied Water, L/kg 290
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 31 to 170
76
Resilience: Unit (Modulus of Resilience), kJ/m3 160 to 1440
170
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 21 to 33
32
Strength to Weight: Bending, points 20 to 27
38
Thermal Diffusivity, mm2/s 3.5
51
Thermal Shock Resistance, points 16 to 25
14

Alloy Composition

Aluminum (Al), % 0
92.4 to 94.8
Carbon (C), % 0 to 0.050
0
Chromium (Cr), % 27 to 31
0 to 0.15
Copper (Cu), % 0 to 0.5
0 to 0.25
Iron (Fe), % 7.0 to 11
0.1 to 0.35
Magnesium (Mg), % 0
4.7 to 5.5
Manganese (Mn), % 0 to 0.5
0.2 to 0.5
Nickel (Ni), % 58 to 66
0
Silicon (Si), % 0 to 0.5
0 to 0.2
Sulfur (S), % 0 to 0.015
0
Zinc (Zn), % 0
0.2 to 0.4
Zirconium (Zr), % 0
0 to 0.15
Residuals, % 0
0 to 0.15