MakeItFrom.com
Menu (ESC)

Nickel 690 vs. EN AC-51300 Aluminum

Nickel 690 belongs to the nickel alloys classification, while EN AC-51300 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is nickel 690 and the bottom bar is EN AC-51300 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 90
65
Elastic (Young's, Tensile) Modulus, GPa 200
67
Elongation at Break, % 3.4 to 34
3.7
Fatigue Strength, MPa 180 to 300
78
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 79
25
Tensile Strength: Ultimate (UTS), MPa 640 to 990
190
Tensile Strength: Yield (Proof), MPa 250 to 760
110

Thermal Properties

Latent Heat of Fusion, J/g 320
400
Maximum Temperature: Mechanical, °C 1010
170
Melting Completion (Liquidus), °C 1380
640
Melting Onset (Solidus), °C 1340
600
Specific Heat Capacity, J/kg-K 470
910
Thermal Conductivity, W/m-K 14
110
Thermal Expansion, µm/m-K 14
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.5
31
Electrical Conductivity: Equal Weight (Specific), % IACS 1.6
100

Otherwise Unclassified Properties

Base Metal Price, % relative 50
9.5
Density, g/cm3 8.3
2.7
Embodied Carbon, kg CO2/kg material 8.2
9.1
Embodied Energy, MJ/kg 120
150
Embodied Water, L/kg 290
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 31 to 170
6.1
Resilience: Unit (Modulus of Resilience), kJ/m3 160 to 1440
87
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 21 to 33
20
Strength to Weight: Bending, points 20 to 27
28
Thermal Diffusivity, mm2/s 3.5
45
Thermal Shock Resistance, points 16 to 25
8.6

Alloy Composition

Aluminum (Al), % 0
91.4 to 95.5
Carbon (C), % 0 to 0.050
0
Chromium (Cr), % 27 to 31
0
Copper (Cu), % 0 to 0.5
0 to 0.1
Iron (Fe), % 7.0 to 11
0 to 0.55
Magnesium (Mg), % 0
4.5 to 6.5
Manganese (Mn), % 0 to 0.5
0 to 0.45
Nickel (Ni), % 58 to 66
0
Silicon (Si), % 0 to 0.5
0 to 0.55
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15