PA 4/6 vs. Thermoplastic PI
Both PA 4/6 and thermoplastic PI are thermoplastics. There are 5 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is PA 4/6 and the bottom bar is thermoplastic PI.
Metric UnitsUS Customary Units
Material Properties
| Elastic (Young's, Tensile) Modulus, GPa | 1.0 to 16 | |
| 3.7 to 20 |
| Elongation at Break, % | 2.5 to 50 | |
| 1.8 to 7.5 |
| Flexural Modulus, GPa | 0.9 to 14 | |
| 3.8 to 19 |
| Flexural Strength, MPa | 50 to 350 | |
| 170 to 330 |
| Tensile Strength: Ultimate (UTS), MPa | 120 to 250 | |
| 110 to 220 |