PA 6/10 vs. Melamine
PA 6/10 belongs to the thermoplastics classification, while melamine belongs to the thermoset plastics. There are 13 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is PA 6/10 and the bottom bar is melamine.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 1.6 to 2.3 | |
7.0 |
Elongation at Break, % | 110 to 120 | |
1.0 |
Tensile Strength: Ultimate (UTS), MPa | 45 to 60 | |
30 |
Thermal Properties
Maximum Temperature: Decomposition, °C | 440 | |
350 |
Specific Heat Capacity, J/kg-K | 1510 | |
1200 |
Thermal Conductivity, W/m-K | 0.23 | |
0.5 |
Electrical Properties
Dielectric Strength (Breakdown Potential), kV/mm | 15 to 19 | |
30 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.1 | |
1.5 |
Common Calculations
Stiffness to Weight: Axial, points | 0.78 to 1.1 | |
2.6 |
Stiffness to Weight: Bending, points | 34 to 39 | |
43 |
Strength to Weight: Axial, points | 11 to 15 | |
5.6 |
Strength to Weight: Bending, points | 25 to 30 | |
14 |
Thermal Diffusivity, mm2/s | 0.13 | |
0.28 |