MakeItFrom.com
Menu (ESC)

PA 6/10 vs. PC

Both PA 6/10 and PC are thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.

For each property being compared, the top bar is PA 6/10 and the bottom bar is PC.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 1.1
1.2 to 1.4
Elongation at Break, % 110 to 120
3.5 to 110
Flexural Modulus, GPa 1.4 to 2.0
2.3 to 10
Flexural Strength, MPa 48 to 59
92 to 160
Impact Strength: Notched Izod, J/m 85
140 to 440
Specific Heat Capacity, J/kg-K 1510
1000 to 1200
Strength to Weight: Axial, points 11 to 15
15 to 30
Strength to Weight: Bending, points 25 to 30
30 to 45
Tensile Strength: Ultimate (UTS), MPa 45 to 60
66 to 160