PA 6/10 vs. PPE
Both PA 6/10 and PPE are thermoplastics. There are 16 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is PA 6/10 and the bottom bar is PPE.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 1.6 to 2.3 | |
| 2.3 |
| Elongation at Break, % | 110 to 120 | |
| 30 |
| Flexural Strength, MPa | 48 to 59 | |
| 75 |
| Tensile Strength: Ultimate (UTS), MPa | 45 to 60 | |
| 55 |
Thermal Properties
| Maximum Temperature: Mechanical, °C | 80 | |
| 90 |
| Melting Onset (Solidus), °C | 220 | |
| 260 |
| Specific Heat Capacity, J/kg-K | 1510 | |
| 1200 |
| Thermal Conductivity, W/m-K | 0.23 | |
| 0.22 |
Electrical Properties
| Dielectric Strength (Breakdown Potential), kV/mm | 15 to 19 | |
| 19 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.1 | |
| 1.1 |
| Water Absorption After 24 Hours, % | 0.26 | |
| 0.23 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.78 to 1.1 | |
| 1.2 |
| Stiffness to Weight: Bending, points | 34 to 39 | |
| 42 |
| Strength to Weight: Axial, points | 11 to 15 | |
| 14 |
| Strength to Weight: Bending, points | 25 to 30 | |
| 30 |
| Thermal Diffusivity, mm2/s | 0.13 | |
| 0.17 |