PA 6/10 vs. PSU
Both PA 6/10 and PSU are thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is PA 6/10 and the bottom bar is PSU.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.1 | |
| 1.2 to 1.6 |
| Elongation at Break, % | 110 to 120 | |
| 2.0 to 52 |
| Flexural Modulus, GPa | 1.4 to 2.0 | |
| 2.7 to 14 |
| Flexural Strength, MPa | 48 to 59 | |
| 110 to 200 |
| Impact Strength: Notched Izod, J/m | 85 | |
| 59 to 100 |
| Specific Heat Capacity, J/kg-K | 1510 | |
| 910 to 1000 |
| Strength to Weight: Axial, points | 11 to 15 | |
| 16 to 25 |
| Strength to Weight: Bending, points | 25 to 30 | |
| 30 to 40 |
| Tensile Strength: Ultimate (UTS), MPa | 45 to 60 | |
| 70 to 140 |