PAS vs. PPE
Both PAS and PPE are thermoplastics. There are 16 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is PAS and the bottom bar is PPE.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 2.7 | |
2.3 |
Elongation at Break, % | 40 | |
30 |
Flexural Strength, MPa | 110 | |
75 |
Tensile Strength: Ultimate (UTS), MPa | 83 | |
55 |
Thermal Properties
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 200 | |
120 |
Thermal Expansion, µm/m-K | 49 | |
90 |
Electrical Properties
Dielectric Constant (Relative Permittivity) At 1 MHz | 3.5 | |
2.7 |
Dielectric Strength (Breakdown Potential), kV/mm | 15 | |
19 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 15 | |
13 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 | |
1.1 |
Water Absorption After 24 Hours, % | 0.4 | |
0.23 |
Common Calculations
Stiffness to Weight: Axial, points | 1.1 | |
1.2 |
Stiffness to Weight: Bending, points | 34 | |
42 |
Strength to Weight: Axial, points | 17 | |
14 |
Strength to Weight: Bending, points | 31 | |
30 |
Thermal Shock Resistance, points | 45 | |
19 |