PBI vs. AU
PBI belongs to the thermoset plastics classification, while AU belongs to the thermoset elastomers (rubber). There are 7 material properties with values for both materials. Properties with values for just one material (22, in this case) are not shown.
For each property being compared, the top bar is PBI and the bottom bar is AU.
Metric UnitsUS Customary Units
Material Properties
| Elongation at Break, % | 3.0 | |
| 580 |
| Glass Transition Temperature, °C | 410 | |
| -50 |
| Maximum Temperature: Decomposition, °C | 590 | |
| 330 |
| Maximum Temperature: Mechanical, °C | 340 | |
| 90 |
| Specific Heat Capacity, J/kg-K | 930 | |
| 1760 |
| Tensile Strength: Ultimate (UTS), MPa | 160 | |
| 39 |
| Thermal Conductivity, W/m-K | 0.41 | |
| 0.19 |