PC vs. Epoxy
PC belongs to the thermoplastics classification, while epoxy belongs to the thermoset plastics. There are 8 material properties with values for both materials. Properties with values for just one material (21, in this case) are not shown.
For each property being compared, the top bar is PC and the bottom bar is epoxy.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.2 to 1.4 | |
| 1.3 |
| Elongation at Break, % | 3.5 to 110 | |
| 4.5 |
| Glass Transition Temperature, °C | 150 | |
| 120 |
| Specific Heat Capacity, J/kg-K | 1000 to 1200 | |
| 1500 |
| Strength to Weight: Axial, points | 15 to 30 | |
| 14 |
| Strength to Weight: Bending, points | 30 to 45 | |
| 28 |
| Tensile Strength: Ultimate (UTS), MPa | 66 to 160 | |
| 67 |
| Thermal Expansion, µm/m-K | 10 to 69 | |
| 100 |