PC vs. PHB
Both PC and PHB are thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown.
For each property being compared, the top bar is PC and the bottom bar is PHB.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.2 to 1.4 | |
| 1.3 |
| Elongation at Break, % | 3.5 to 110 | |
| 7.5 |
| Flexural Strength, MPa | 92 to 160 | |
| 20 |
| Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 130 to 150 | |
| 60 |
| Strength to Weight: Axial, points | 15 to 30 | |
| 6.7 |
| Strength to Weight: Bending, points | 30 to 45 | |
| 17 |
| Tensile Strength: Ultimate (UTS), MPa | 66 to 160 | |
| 30 |