PEEK vs. PA 4/6
Both PEEK and PA 4/6 are thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (25, in this case) are not shown.
For each property being compared, the top bar is PEEK and the bottom bar is PA 4/6.
Metric UnitsUS Customary Units
Material Properties
| Elastic (Young's, Tensile) Modulus, GPa | 4.0 to 24 | |
| 1.0 to 16 |
| Electrical Resistivity Order of Magnitude, 10x Ω-m | 3.0 to 14 | |
| 7.0 to 13 |
| Elongation at Break, % | 1.6 to 43 | |
| 2.5 to 50 |
| Flexural Modulus, GPa | 3.8 to 19 | |
| 0.9 to 14 |
| Flexural Strength, MPa | 150 to 330 | |
| 50 to 350 |
| Melting Onset (Solidus), °C | 340 | |
| 300 |
| Tensile Strength: Ultimate (UTS), MPa | 97 to 200 | |
| 120 to 250 |