PEEK vs. PPE
Both PEEK and PPE are thermoplastics. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown.
For each property being compared, the top bar is PEEK and the bottom bar is PPE.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 4.0 to 24 | |
2.3 |
Elongation at Break, % | 1.6 to 43 | |
30 |
Flexural Strength, MPa | 150 to 330 | |
75 |
Tensile Strength: Ultimate (UTS), MPa | 97 to 200 | |
55 |
Thermal Properties
Glass Transition Temperature, °C | 240 | |
85 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 160 to 300 | |
120 |
Maximum Temperature: Autoignition, °C | 600 | |
430 |
Maximum Temperature: Mechanical, °C | 330 | |
90 |
Melting Onset (Solidus), °C | 340 | |
260 |
Specific Heat Capacity, J/kg-K | 1390 to 1700 | |
1200 |
Thermal Conductivity, W/m-K | 0.25 to 0.93 | |
0.22 |
Thermal Expansion, µm/m-K | 15 to 52 | |
90 |
Electrical Properties
Electrical Resistivity Order of Magnitude, 10x Ω-m | 3.0 to 14 | |
13 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.3 to 1.5 | |
1.1 |
Water Absorption After 24 Hours, % | 0.060 to 0.3 | |
0.23 |
Common Calculations
Stiffness to Weight: Axial, points | 1.5 to 10 | |
1.2 |
Stiffness to Weight: Bending, points | 36 to 73 | |
42 |
Strength to Weight: Axial, points | 20 to 41 | |
14 |
Strength to Weight: Bending, points | 36 to 55 | |
30 |
Thermal Diffusivity, mm2/s | 0.1 to 0.51 | |
0.17 |
Thermal Shock Resistance, points | 34 to 57 | |
19 |