PEEK vs. PTMT
Both PEEK and PTMT are thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (25, in this case) are not shown.
For each property being compared, the top bar is PEEK and the bottom bar is PTMT.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 1.3 to 1.5 | |
1.3 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 160 to 300 | |
50 |
Impact Strength: Notched Izod, J/m | 78 to 120 | |
53 |
Maximum Temperature: Mechanical, °C | 330 | |
130 |
Strength to Weight: Axial, points | 20 to 41 | |
12 |
Strength to Weight: Bending, points | 36 to 55 | |
25 |
Tensile Strength: Ultimate (UTS), MPa | 97 to 200 | |
56 |