PEEK vs. AU
PEEK belongs to the thermoplastics classification, while AU belongs to the thermoset elastomers (rubber). There are 8 material properties with values for both materials. Properties with values for just one material (21, in this case) are not shown.
For each property being compared, the top bar is PEEK and the bottom bar is AU.
Metric UnitsUS Customary Units
Material Properties
| Elongation at Break, % | 1.6 to 43 | |
| 580 |
| Glass Transition Temperature, °C | 240 | |
| -50 |
| Maximum Temperature: Autoignition, °C | 600 | |
| 360 |
| Maximum Temperature: Decomposition, °C | 570 | |
| 330 |
| Maximum Temperature: Mechanical, °C | 330 | |
| 90 |
| Specific Heat Capacity, J/kg-K | 1390 to 1700 | |
| 1760 |
| Tensile Strength: Ultimate (UTS), MPa | 97 to 200 | |
| 39 |
| Thermal Conductivity, W/m-K | 0.25 to 0.93 | |
| 0.19 |