PEEK vs. SBR Rubber
PEEK belongs to the thermoplastics classification, while SBR rubber belongs to the thermoset elastomers (rubber). There are 11 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is PEEK and the bottom bar is SBR rubber.
Metric UnitsUS Customary Units
Mechanical Properties
Elongation at Break, % | 1.6 to 43 | |
530 |
Tensile Strength: Ultimate (UTS), MPa | 97 to 200 | |
14 |
Thermal Properties
Glass Transition Temperature, °C | 240 | |
-30 |
Maximum Temperature: Mechanical, °C | 330 | |
100 |
Specific Heat Capacity, J/kg-K | 1390 to 1700 | |
1880 |
Thermal Conductivity, W/m-K | 0.25 to 0.93 | |
0.17 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.3 to 1.5 | |
1.1 |
Limiting Oxygen Index (LOI), % | 38 | |
18 |
Common Calculations
Strength to Weight: Axial, points | 20 to 41 | |
3.4 |
Strength to Weight: Bending, points | 36 to 55 | |
11 |
Thermal Diffusivity, mm2/s | 0.1 to 0.51 | |
0.082 |