MakeItFrom.com
Menu (ESC)

PEI vs. PPS

Both PEI and PPS are thermoplastics. There are 14 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown.

For each property being compared, the top bar is PEI and the bottom bar is PPS.

Metric UnitsUS Customary Units

Mechanical Properties

Compressive (Crushing) Strength, MPa 140 to 180
95 to 160
Elongation at Break, % 3.0 to 34
2.5 to 11
Flexural Modulus, GPa 3.4 to 5.9
13 to 17
Flexural Strength, MPa 140 to 210
120 to 190
Impact Strength: Notched Izod, J/m 55 to 110
21 to 80
Tensile Strength: Ultimate (UTS), MPa 110 to 160
75 to 190

Thermal Properties

Glass Transition Temperature, °C 210
190 to 290
Heat Deflection Temperature At 1.82 MPa (264 psi), °C 200 to 210
130 to 260
Specific Heat Capacity, J/kg-K 1050 to 1220
910 to 1000
Thermal Expansion, µm/m-K 20 to 53
20 to 45

Otherwise Unclassified Properties

Density, g/cm3 1.3 to 1.5
1.3 to 1.7
Water Absorption At Saturation, % 0.9 to 1.3
0.060 to 0.1

Common Calculations

Strength to Weight: Axial, points 24 to 30
16 to 37
Strength to Weight: Bending, points 40 to 44
30 to 52