PHB vs. Thermoset PI
PHB belongs to the thermoplastics classification, while thermoset PI belongs to the thermoset plastics. There are 10 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown.
For each property being compared, the top bar is PHB and the bottom bar is thermoset PI.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 1.3 | |
1.4 to 1.6 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 14 | |
15 |
Elongation at Break, % | 7.5 | |
2.0 to 5.9 |
Flexural Strength, MPa | 20 | |
60 to 100 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 60 | |
370 |
Maximum Temperature: Mechanical, °C | 120 | |
260 |
Strength to Weight: Axial, points | 6.7 | |
6.5 to 16 |
Strength to Weight: Bending, points | 17 | |
16 to 30 |
Tensile Strength: Ultimate (UTS), MPa | 30 | |
37 to 81 |
Water Absorption After 24 Hours, % | 0.75 | |
0.14 to 0.24 |