PLA vs. PPSU
Both PLA and PPSU are thermoplastics. There are 16 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is PLA and the bottom bar is PPSU.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 3.5 | |
3.6 |
Elongation at Break, % | 6.0 | |
26 |
Flexural Modulus, GPa | 4.0 | |
4.7 |
Flexural Strength, MPa | 80 | |
130 |
Tensile Strength: Ultimate (UTS), MPa | 50 | |
95 |
Thermal Properties
Glass Transition Temperature, °C | 60 | |
220 |
Heat Deflection Temperature At 455 kPa (66 psi), °C | 65 | |
220 |
Maximum Temperature: Mechanical, °C | 50 | |
160 |
Specific Heat Capacity, J/kg-K | 1800 | |
970 |
Thermal Conductivity, W/m-K | 0.13 | |
0.24 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.3 | |
1.4 |
Common Calculations
Stiffness to Weight: Axial, points | 1.6 | |
1.4 |
Stiffness to Weight: Bending, points | 40 | |
36 |
Strength to Weight: Axial, points | 11 | |
19 |
Strength to Weight: Bending, points | 24 | |
33 |
Thermal Diffusivity, mm2/s | 0.058 | |
0.17 |