PMP vs. PA 6/10
Both PMP and PA 6/10 are thermoplastics. There are 16 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is PMP and the bottom bar is PA 6/10.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 1.1 | |
| 1.6 to 2.3 |
| Elongation at Break, % | 30 | |
| 110 to 120 |
| Impact Strength: Notched Izod, J/m | 130 | |
| 85 |
| Tensile Strength: Ultimate (UTS), MPa | 24 | |
| 45 to 60 |
Thermal Properties
| Maximum Temperature: Mechanical, °C | 140 | |
| 80 |
| Melting Onset (Solidus), °C | 230 | |
| 220 |
| Specific Heat Capacity, J/kg-K | 1750 | |
| 1510 |
| Thermal Conductivity, W/m-K | 0.17 | |
| 0.23 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 2.1 | |
| 3.9 to 12 |
| Dielectric Strength (Breakdown Potential), kV/mm | 28 | |
| 15 to 19 |
Otherwise Unclassified Properties
| Density, g/cm3 | 0.83 | |
| 1.1 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.74 | |
| 0.78 to 1.1 |
| Stiffness to Weight: Bending, points | 41 | |
| 34 to 39 |
| Strength to Weight: Axial, points | 8.0 | |
| 11 to 15 |
| Strength to Weight: Bending, points | 22 | |
| 25 to 30 |
| Thermal Diffusivity, mm2/s | 0.12 | |
| 0.13 |