PPE vs. Ionomer
Both PPE and ionomer are thermoplastics. There are 12 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is PPE and the bottom bar is ionomer.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 2.3 | |
0.4 |
Elongation at Break, % | 30 | |
350 |
Tensile Strength: Ultimate (UTS), MPa | 55 | |
37 |
Thermal Properties
Maximum Temperature: Mechanical, °C | 90 | |
75 |
Melting Onset (Solidus), °C | 260 | |
94 |
Vicat Softening Temperature, °C | 140 | |
72 |
Electrical Properties
Dielectric Strength (Breakdown Potential), kV/mm | 19 | |
39 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.1 | |
0.94 |
Common Calculations
Stiffness to Weight: Axial, points | 1.2 | |
0.24 |
Stiffness to Weight: Bending, points | 42 | |
26 |
Strength to Weight: Axial, points | 14 | |
11 |
Strength to Weight: Bending, points | 30 | |
26 |