PPE vs. PFA
Both PPE and PFA are thermoplastics. There are 16 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is PPE and the bottom bar is PFA.
Metric UnitsUS Customary Units
Mechanical Properties
Elongation at Break, % | 30 | |
300 |
Tensile Strength: Ultimate (UTS), MPa | 55 | |
30 |
Thermal Properties
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 120 | |
50 |
Maximum Temperature: Mechanical, °C | 90 | |
260 |
Melting Onset (Solidus), °C | 260 | |
300 |
Specific Heat Capacity, J/kg-K | 1200 | |
1000 |
Thermal Conductivity, W/m-K | 0.22 | |
0.25 |
Thermal Expansion, µm/m-K | 90 | |
120 |
Electrical Properties
Dielectric Constant (Relative Permittivity) At 1 MHz | 2.7 | |
2.6 |
Dielectric Strength (Breakdown Potential), kV/mm | 19 | |
22 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 13 | |
16 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.1 | |
2.2 |
Water Absorption After 24 Hours, % | 0.23 | |
0 |
Common Calculations
Strength to Weight: Axial, points | 14 | |
3.9 |
Strength to Weight: Bending, points | 30 | |
10 |
Thermal Diffusivity, mm2/s | 0.17 | |
0.12 |