PPS vs. Ionomer
Both PPS and ionomer are thermoplastics. There are 5 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is PPS and the bottom bar is ionomer.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 1.3 to 1.7 | |
0.94 |
Elongation at Break, % | 2.5 to 11 | |
350 |
Strength to Weight: Axial, points | 16 to 37 | |
11 |
Strength to Weight: Bending, points | 30 to 52 | |
26 |
Tensile Strength: Ultimate (UTS), MPa | 75 to 190 | |
37 |