PPS vs. RPU
PPS belongs to the thermoplastics classification, while RPU belongs to the thermoset plastics. There are 9 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is PPS and the bottom bar is RPU.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.3 to 1.7 | |
| 1.2 |
| Elongation at Break, % | 2.5 to 11 | |
| 90 |
| Flexural Modulus, GPa | 13 to 17 | |
| 2.0 |
| Flexural Strength, MPa | 120 to 190 | |
| 83 |
| Specific Heat Capacity, J/kg-K | 910 to 1000 | |
| 1750 |
| Strength to Weight: Axial, points | 16 to 37 | |
| 14 |
| Strength to Weight: Bending, points | 30 to 52 | |
| 28 |
| Tensile Strength: Ultimate (UTS), MPa | 75 to 190 | |
| 60 |
| Thermal Expansion, µm/m-K | 20 to 45 | |
| 63 |