PPA vs. PFA
Both PPA and PFA are thermoplastics. There are 12 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown.
For each property being compared, the top bar is PPA and the bottom bar is PFA.
Metric UnitsUS Customary Units
Mechanical Properties
| Elongation at Break, % | 30 | |
| 300 |
| Flexural Modulus, GPa | 2.3 to 2.4 | |
| 0.7 |
| Tensile Strength: Ultimate (UTS), MPa | 57 to 69 | |
| 30 |
Thermal Properties
| Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 120 | |
| 50 |
| Melting Onset (Solidus), °C | 310 | |
| 300 |
| Specific Heat Capacity, J/kg-K | 1400 | |
| 1000 |
| Thermal Conductivity, W/m-K | 0.15 | |
| 0.25 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.1 | |
| 2.2 |
| Water Absorption After 24 Hours, % | 0.7 | |
| 0 |
Common Calculations
| Strength to Weight: Axial, points | 14 to 17 | |
| 3.9 |
| Strength to Weight: Bending, points | 29 to 33 | |
| 10 |
| Thermal Diffusivity, mm2/s | 0.095 | |
| 0.12 |