PSU vs. PMMA
Both PSU and PMMA are thermoplastics. There are 12 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is PSU and the bottom bar is PMMA.
Metric UnitsUS Customary Units
Mechanical Properties
| Compressive (Crushing) Strength, MPa | 95 to 180 | |
| 120 |
| Elongation at Break, % | 2.0 to 52 | |
| 4.0 |
| Flexural Strength, MPa | 110 to 200 | |
| 110 |
| Impact Strength: Notched Izod, J/m | 59 to 100 | |
| 74 |
| Rockwell M Hardness | 69 to 95 | |
| 93 |
| Tensile Strength: Ultimate (UTS), MPa | 70 to 140 | |
| 71 |
Thermal Properties
| Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 180 to 200 | |
| 96 |
| Specific Heat Capacity, J/kg-K | 910 to 1000 | |
| 1260 |
| Thermal Expansion, µm/m-K | 25 to 57 | |
| 76 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.2 to 1.6 | |
| 1.2 |
Common Calculations
| Strength to Weight: Axial, points | 16 to 25 | |
| 17 |
| Strength to Weight: Bending, points | 30 to 40 | |
| 32 |