PTFE vs. ASA
Both PTFE and ASA are thermoplastics. There are 8 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown.
For each property being compared, the top bar is PTFE and the bottom bar is ASA.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 2.1 to 2.3 | |
1.1 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 2.0 to 18 | |
13 |
Elongation at Break, % | 75 to 300 | |
6.0 |
Strength to Weight: Axial, points | 1.7 to 3.2 | |
14 |
Strength to Weight: Bending, points | 5.7 to 8.7 | |
30 |
Tensile Strength: Ultimate (UTS), MPa | 13 to 25 | |
55 |
Thermal Conductivity, W/m-K | 0.24 to 0.65 | |
0.18 |
Thermal Expansion, µm/m-K | 110 to 120 | |
95 |