PTFE vs. PA 6/10
Both PTFE and PA 6/10 are thermoplastics. There are 12 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is PTFE and the bottom bar is PA 6/10.
Metric UnitsUS Customary Units
Mechanical Properties
| Elongation at Break, % | 75 to 300 | |
| 110 to 120 |
| Flexural Modulus, GPa | 0.4 to 1.3 | |
| 1.4 to 2.0 |
| Flexural Strength, MPa | 13 to 50 | |
| 48 to 59 |
| Tensile Strength: Ultimate (UTS), MPa | 13 to 25 | |
| 45 to 60 |
Thermal Properties
| Maximum Temperature: Mechanical, °C | 260 to 270 | |
| 80 |
| Melting Onset (Solidus), °C | 330 to 340 | |
| 220 |
| Thermal Conductivity, W/m-K | 0.24 to 0.65 | |
| 0.23 |
Otherwise Unclassified Properties
| Density, g/cm3 | 2.1 to 2.3 | |
| 1.1 |
| Limiting Oxygen Index (LOI), % | 90 | |
| 25 |
| Water Absorption After 24 Hours, % | 0.0093 to 0.050 | |
| 0.26 |
Common Calculations
| Strength to Weight: Axial, points | 1.7 to 3.2 | |
| 11 to 15 |
| Strength to Weight: Bending, points | 5.7 to 8.7 | |
| 25 to 30 |