PTFE vs. Thermoplastic PI
Both PTFE and thermoplastic PI are thermoplastics. There are 8 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is PTFE and the bottom bar is thermoplastic PI.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 2.1 to 2.3 | |
1.4 to 1.5 |
Elongation at Break, % | 75 to 300 | |
1.8 to 7.5 |
Flexural Modulus, GPa | 0.4 to 1.3 | |
3.8 to 19 |
Flexural Strength, MPa | 13 to 50 | |
170 to 330 |
Limiting Oxygen Index (LOI), % | 90 | |
35 |
Strength to Weight: Axial, points | 1.7 to 3.2 | |
22 to 42 |
Strength to Weight: Bending, points | 5.7 to 8.7 | |
36 to 57 |
Tensile Strength: Ultimate (UTS), MPa | 13 to 25 | |
110 to 220 |