PTMT vs. ABS
Both PTMT and ABS are thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is PTMT and the bottom bar is ABS.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 1.3 | |
1.0 to 1.4 |
Dielectric Constant (Relative Permittivity) At 1 Hz | 3.2 | |
3.1 to 3.2 |
Dielectric Strength (Breakdown Potential), kV/mm | 17 | |
15 to 16 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 50 | |
76 to 110 |
Heat Deflection Temperature At 455 kPa (66 psi), °C | 150 | |
83 to 110 |
Impact Strength: Notched Izod, J/m | 53 | |
70 to 370 |
Strength to Weight: Axial, points | 12 | |
10 to 22 |
Strength to Weight: Bending, points | 25 | |
24 to 37 |
Tensile Strength: Ultimate (UTS), MPa | 56 | |
37 to 110 |