AU vs. PTFE
AU belongs to the thermoset elastomers (rubber) classification, while PTFE belongs to the thermoplastics. There are 4 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is AU and the bottom bar is PTFE.
Metric UnitsUS Customary Units
Material Properties
| Elongation at Break, % | 580 | |
| 75 to 300 |
| Maximum Temperature: Mechanical, °C | 90 | |
| 260 to 270 |
| Tensile Strength: Ultimate (UTS), MPa | 39 | |
| 13 to 25 |
| Thermal Conductivity, W/m-K | 0.19 | |
| 0.24 to 0.65 |