AU vs. UF
AU belongs to the thermoset elastomers (rubber) classification, while UF belongs to the thermoset plastics. There are 4 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is AU and the bottom bar is UF.
Metric UnitsUS Customary Units
Material Properties
| Elongation at Break, % | 580 | |
| 1.0 |
| Specific Heat Capacity, J/kg-K | 1760 | |
| 1200 |
| Tensile Strength: Ultimate (UTS), MPa | 39 | |
| 30 |
| Thermal Conductivity, W/m-K | 0.19 | |
| 0.4 |