PVF vs. IR Rubber
PVF belongs to the thermoplastics classification, while IR rubber belongs to the thermoset elastomers (rubber). There are 11 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown.
For each property being compared, the top bar is PVF and the bottom bar is IR rubber.
Metric UnitsUS Customary Units
Mechanical Properties
| Tensile Strength: Ultimate (UTS), MPa | 65 | |
| 19 |
Thermal Properties
| Glass Transition Temperature, °C | -20 | |
| -70 |
| Maximum Temperature: Autoignition, °C | 480 | |
| 300 |
| Maximum Temperature: Decomposition, °C | 360 | |
| 300 |
| Specific Heat Capacity, J/kg-K | 1300 | |
| 1550 |
| Thermal Conductivity, W/m-K | 0.13 | |
| 0.14 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.4 | |
| 1.0 |
| Limiting Oxygen Index (LOI), % | 23 | |
| 19 |
Common Calculations
| Strength to Weight: Axial, points | 13 | |
| 5.6 |
| Strength to Weight: Bending, points | 26 | |
| 17 |
| Thermal Diffusivity, mm2/s | 0.071 | |
| 0.1 |