PVF vs. RPU
PVF belongs to the thermoplastics classification, while RPU belongs to the thermoset plastics. There are 11 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown.
For each property being compared, the top bar is PVF and the bottom bar is RPU.
Metric UnitsUS Customary Units
Mechanical Properties
Flexural Strength, MPa | 90 | |
83 |
Tensile Strength: Ultimate (UTS), MPa | 65 | |
60 |
Thermal Properties
Maximum Temperature: Autoignition, °C | 480 | |
380 |
Maximum Temperature: Decomposition, °C | 360 | |
270 |
Specific Heat Capacity, J/kg-K | 1300 | |
1750 |
Thermal Conductivity, W/m-K | 0.13 | |
0.19 |
Thermal Expansion, µm/m-K | 100 | |
63 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 | |
1.2 |
Common Calculations
Strength to Weight: Axial, points | 13 | |
14 |
Strength to Weight: Bending, points | 26 | |
28 |
Thermal Diffusivity, mm2/s | 0.071 | |
0.090 |