RPU vs. PAS
RPU belongs to the thermoset plastics classification, while PAS belongs to the thermoplastics. There are 14 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is RPU and the bottom bar is PAS.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 2.2 | |
| 2.7 |
| Elongation at Break, % | 90 | |
| 40 |
| Flexural Modulus, GPa | 2.0 | |
| 2.8 |
| Flexural Strength, MPa | 83 | |
| 110 |
| Tensile Strength: Ultimate (UTS), MPa | 60 | |
| 83 |
Thermal Properties
| Thermal Expansion, µm/m-K | 63 | |
| 49 |
Electrical Properties
| Dielectric Strength (Breakdown Potential), kV/mm | 19 | |
| 15 |
| Electrical Resistivity Order of Magnitude, 10x Ω-m | 13 | |
| 15 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.2 | |
| 1.4 |
Common Calculations
| Stiffness to Weight: Axial, points | 1.0 | |
| 1.1 |
| Stiffness to Weight: Bending, points | 36 | |
| 34 |
| Strength to Weight: Axial, points | 14 | |
| 17 |
| Strength to Weight: Bending, points | 28 | |
| 31 |
| Thermal Shock Resistance, points | 31 | |
| 45 |