MakeItFrom.com
Menu (ESC)

SAE-AISI 1017 Steel vs. 206.0 Aluminum

SAE-AISI 1017 steel belongs to the iron alloys classification, while 206.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1017 steel and the bottom bar is 206.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 120 to 130
95 to 110
Elastic (Young's, Tensile) Modulus, GPa 190
71
Elongation at Break, % 20 to 30
8.4 to 12
Fatigue Strength, MPa 170 to 270
88 to 210
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
27
Shear Strength, MPa 280 to 290
260
Tensile Strength: Ultimate (UTS), MPa 420 to 460
330 to 440
Tensile Strength: Yield (Proof), MPa 220 to 390
190 to 350

Thermal Properties

Latent Heat of Fusion, J/g 250
390
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1470
650
Melting Onset (Solidus), °C 1420
570
Specific Heat Capacity, J/kg-K 470
880
Thermal Conductivity, W/m-K 53
120
Thermal Expansion, µm/m-K 12
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 6.9
33
Electrical Conductivity: Equal Weight (Specific), % IACS 7.9
99

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
11
Density, g/cm3 7.9
3.0
Embodied Carbon, kg CO2/kg material 1.4
8.0
Embodied Energy, MJ/kg 18
150
Embodied Water, L/kg 45
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 88 to 110
24 to 49
Resilience: Unit (Modulus of Resilience), kJ/m3 130 to 400
270 to 840
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
46
Strength to Weight: Axial, points 15 to 16
30 to 40
Strength to Weight: Bending, points 16 to 17
35 to 42
Thermal Diffusivity, mm2/s 14
46
Thermal Shock Resistance, points 13 to 14
17 to 23

Alloy Composition

Aluminum (Al), % 0
93.3 to 95.3
Carbon (C), % 0.15 to 0.2
0
Copper (Cu), % 0
4.2 to 5.0
Iron (Fe), % 99.11 to 99.55
0 to 0.15
Magnesium (Mg), % 0
0.15 to 0.35
Manganese (Mn), % 0.3 to 0.6
0.2 to 0.5
Nickel (Ni), % 0
0 to 0.050
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
0 to 0.1
Sulfur (S), % 0 to 0.050
0
Tin (Sn), % 0
0 to 0.050
Titanium (Ti), % 0
0.15 to 0.3
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15