SAE-AISI 1018 Steel vs. 7010 Aluminum
SAE-AISI 1018 steel belongs to the iron alloys classification, while 7010 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is SAE-AISI 1018 steel and the bottom bar is 7010 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
70 |
Elongation at Break, % | 17 to 27 | |
3.9 to 6.8 |
Fatigue Strength, MPa | 180 to 270 | |
160 to 190 |
Poisson's Ratio | 0.29 | |
0.32 |
Shear Modulus, GPa | 73 | |
26 |
Shear Strength, MPa | 280 to 300 | |
300 to 340 |
Tensile Strength: Ultimate (UTS), MPa | 430 to 480 | |
520 to 590 |
Tensile Strength: Yield (Proof), MPa | 240 to 400 | |
410 to 540 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
380 |
Maximum Temperature: Mechanical, °C | 400 | |
200 |
Melting Completion (Liquidus), °C | 1460 | |
630 |
Melting Onset (Solidus), °C | 1420 | |
480 |
Specific Heat Capacity, J/kg-K | 470 | |
860 |
Thermal Conductivity, W/m-K | 52 | |
150 |
Thermal Expansion, µm/m-K | 12 | |
24 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.0 | |
40 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.0 | |
120 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 1.8 | |
10 |
Density, g/cm3 | 7.9 | |
3.0 |
Embodied Carbon, kg CO2/kg material | 1.4 | |
8.3 |
Embodied Energy, MJ/kg | 18 | |
150 |
Embodied Water, L/kg | 46 | |
1120 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 75 to 100 | |
22 to 33 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 150 to 430 | |
1230 to 2130 |
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 24 | |
45 |
Strength to Weight: Axial, points | 15 to 17 | |
47 to 54 |
Strength to Weight: Bending, points | 16 to 17 | |
47 to 52 |
Thermal Diffusivity, mm2/s | 14 | |
58 |
Thermal Shock Resistance, points | 14 to 15 | |
22 to 26 |
Alloy Composition
Aluminum (Al), % | 0 | |
87.9 to 90.6 |
Carbon (C), % | 0.15 to 0.2 | |
0 |
Chromium (Cr), % | 0 | |
0 to 0.050 |
Copper (Cu), % | 0 | |
1.5 to 2.0 |
Iron (Fe), % | 98.8 to 99.25 | |
0 to 0.15 |
Magnesium (Mg), % | 0 | |
2.1 to 2.6 |
Manganese (Mn), % | 0.6 to 0.9 | |
0 to 0.1 |
Nickel (Ni), % | 0 | |
0 to 0.050 |
Phosphorus (P), % | 0 to 0.040 | |
0 |
Silicon (Si), % | 0 | |
0 to 0.12 |
Sulfur (S), % | 0 to 0.050 | |
0 |
Titanium (Ti), % | 0 | |
0 to 0.060 |
Zinc (Zn), % | 0 | |
5.7 to 6.7 |
Zirconium (Zr), % | 0 | |
0.1 to 0.16 |
Residuals, % | 0 | |
0 to 0.15 |