MakeItFrom.com
Menu (ESC)

SAE-AISI 1023 Steel vs. EN AC-42100 Aluminum

SAE-AISI 1023 steel belongs to the iron alloys classification, while EN AC-42100 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1023 steel and the bottom bar is EN AC-42100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 130 to 140
91
Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 17 to 29
3.4 to 9.0
Fatigue Strength, MPa 180 to 270
76 to 82
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Tensile Strength: Ultimate (UTS), MPa 430 to 480
280 to 290
Tensile Strength: Yield (Proof), MPa 240 to 410
210 to 230

Thermal Properties

Latent Heat of Fusion, J/g 250
500
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
610
Melting Onset (Solidus), °C 1420
600
Specific Heat Capacity, J/kg-K 470
910
Thermal Conductivity, W/m-K 53
150
Thermal Expansion, µm/m-K 12
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 6.9
41
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
140

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
9.5
Density, g/cm3 7.9
2.6
Embodied Carbon, kg CO2/kg material 1.4
8.0
Embodied Energy, MJ/kg 18
150
Embodied Water, L/kg 45
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 77 to 100
9.1 to 23
Resilience: Unit (Modulus of Resilience), kJ/m3 150 to 450
300 to 370
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 24
53
Strength to Weight: Axial, points 15 to 17
30 to 31
Strength to Weight: Bending, points 16 to 17
37 to 38
Thermal Diffusivity, mm2/s 14
66
Thermal Shock Resistance, points 14 to 15
13

Alloy Composition

Aluminum (Al), % 0
91.3 to 93.3
Carbon (C), % 0.2 to 0.25
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 99.06 to 99.5
0 to 0.19
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0.3 to 0.6
0 to 0.1
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
6.5 to 7.5
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.070
Residuals, % 0
0 to 0.1