SAE-AISI 1023 Steel vs. EN AC-46200 Aluminum
SAE-AISI 1023 steel belongs to the iron alloys classification, while EN AC-46200 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is SAE-AISI 1023 steel and the bottom bar is EN AC-46200 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 130 to 140 | |
82 |
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
73 |
Elongation at Break, % | 17 to 29 | |
1.1 |
Fatigue Strength, MPa | 180 to 270 | |
87 |
Poisson's Ratio | 0.29 | |
0.33 |
Shear Modulus, GPa | 73 | |
27 |
Tensile Strength: Ultimate (UTS), MPa | 430 to 480 | |
210 |
Tensile Strength: Yield (Proof), MPa | 240 to 410 | |
130 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
510 |
Maximum Temperature: Mechanical, °C | 400 | |
170 |
Melting Completion (Liquidus), °C | 1460 | |
620 |
Melting Onset (Solidus), °C | 1420 | |
540 |
Specific Heat Capacity, J/kg-K | 470 | |
880 |
Thermal Conductivity, W/m-K | 53 | |
110 |
Thermal Expansion, µm/m-K | 12 | |
22 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 6.9 | |
28 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.0 | |
88 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 1.8 | |
10 |
Density, g/cm3 | 7.9 | |
2.8 |
Embodied Carbon, kg CO2/kg material | 1.4 | |
7.7 |
Embodied Energy, MJ/kg | 18 | |
140 |
Embodied Water, L/kg | 45 | |
1060 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 77 to 100 | |
2.0 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 150 to 450 | |
110 |
Stiffness to Weight: Axial, points | 13 | |
14 |
Stiffness to Weight: Bending, points | 24 | |
50 |
Strength to Weight: Axial, points | 15 to 17 | |
21 |
Strength to Weight: Bending, points | 16 to 17 | |
28 |
Thermal Diffusivity, mm2/s | 14 | |
44 |
Thermal Shock Resistance, points | 14 to 15 | |
9.5 |
Alloy Composition
Aluminum (Al), % | 0 | |
82.6 to 90.3 |
Carbon (C), % | 0.2 to 0.25 | |
0 |
Copper (Cu), % | 0 | |
2.0 to 3.5 |
Iron (Fe), % | 99.06 to 99.5 | |
0 to 0.8 |
Lead (Pb), % | 0 | |
0 to 0.25 |
Magnesium (Mg), % | 0 | |
0.050 to 0.55 |
Manganese (Mn), % | 0.3 to 0.6 | |
0.15 to 0.65 |
Nickel (Ni), % | 0 | |
0 to 0.35 |
Phosphorus (P), % | 0 to 0.040 | |
0 |
Silicon (Si), % | 0 | |
7.5 to 9.5 |
Sulfur (S), % | 0 to 0.050 | |
0 |
Tin (Sn), % | 0 | |
0 to 0.15 |
Titanium (Ti), % | 0 | |
0 to 0.25 |
Zinc (Zn), % | 0 | |
0 to 1.2 |
Residuals, % | 0 | |
0 to 0.25 |