SAE-AISI 1035 Steel vs. Class 2 Tungsten
SAE-AISI 1035 steel belongs to the iron alloys classification, while class 2 tungsten belongs to the otherwise unclassified metals. There are 24 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown.
For each property being compared, the top bar is SAE-AISI 1035 steel and the bottom bar is class 2 tungsten.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
260 |
Elongation at Break, % | 13 to 21 | |
5.7 |
Poisson's Ratio | 0.29 | |
0.28 |
Shear Modulus, GPa | 73 | |
100 |
Tensile Strength: Ultimate (UTS), MPa | 570 to 620 | |
860 |
Tensile Strength: Yield (Proof), MPa | 300 to 530 | |
580 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
160 |
Specific Heat Capacity, J/kg-K | 470 | |
120 |
Thermal Conductivity, W/m-K | 51 | |
20 |
Thermal Expansion, µm/m-K | 12 | |
4.6 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.0 | |
13 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.0 | |
7.8 |
Otherwise Unclassified Properties
Density, g/cm3 | 7.8 | |
15 |
Embodied Carbon, kg CO2/kg material | 1.4 | |
23 |
Embodied Energy, MJ/kg | 18 | |
350 |
Embodied Water, L/kg | 46 | |
140 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 79 to 99 | |
44 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 250 to 740 | |
640 |
Stiffness to Weight: Axial, points | 13 | |
9.6 |
Stiffness to Weight: Bending, points | 24 | |
14 |
Strength to Weight: Axial, points | 20 to 22 | |
16 |
Strength to Weight: Bending, points | 19 to 21 | |
13 |
Thermal Diffusivity, mm2/s | 14 | |
11 |
Thermal Shock Resistance, points | 18 to 20 | |
52 |
Alloy Composition
Carbon (C), % | 0.32 to 0.38 | |
0 |
Iron (Fe), % | 98.6 to 99.08 | |
0 |
Manganese (Mn), % | 0.6 to 0.9 | |
0 |
Phosphorus (P), % | 0 to 0.040 | |
0 |
Sulfur (S), % | 0 to 0.050 | |
0 |
Tungsten (W), % | 0 | |
92.5 |
Residuals, % | 0 | |
7.5 |