SAE-AISI 1043 Steel vs. 7049A Aluminum
SAE-AISI 1043 steel belongs to the iron alloys classification, while 7049A aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is SAE-AISI 1043 steel and the bottom bar is 7049A aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
71 |
Elongation at Break, % | 13 to 18 | |
5.0 to 5.7 |
Fatigue Strength, MPa | 230 to 390 | |
180 |
Poisson's Ratio | 0.29 | |
0.32 |
Shear Modulus, GPa | 73 | |
27 |
Shear Strength, MPa | 400 to 430 | |
340 to 350 |
Tensile Strength: Ultimate (UTS), MPa | 650 to 710 | |
580 to 590 |
Tensile Strength: Yield (Proof), MPa | 350 to 600 | |
500 to 530 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
370 |
Maximum Temperature: Mechanical, °C | 400 | |
200 |
Melting Completion (Liquidus), °C | 1460 | |
640 |
Melting Onset (Solidus), °C | 1420 | |
430 |
Specific Heat Capacity, J/kg-K | 470 | |
850 |
Thermal Conductivity, W/m-K | 51 | |
130 |
Thermal Expansion, µm/m-K | 12 | |
24 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.0 | |
40 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.1 | |
120 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 1.8 | |
10 |
Density, g/cm3 | 7.8 | |
3.1 |
Embodied Carbon, kg CO2/kg material | 1.4 | |
8.2 |
Embodied Energy, MJ/kg | 18 | |
150 |
Embodied Water, L/kg | 46 | |
1100 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 87 to 100 | |
28 to 32 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 320 to 980 | |
1800 to 1990 |
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 24 | |
44 |
Strength to Weight: Axial, points | 23 to 25 | |
52 to 53 |
Strength to Weight: Bending, points | 21 to 22 | |
50 to 51 |
Thermal Diffusivity, mm2/s | 14 | |
50 |
Thermal Shock Resistance, points | 21 to 22 | |
25 |
Alloy Composition
Aluminum (Al), % | 0 | |
84.6 to 89.5 |
Carbon (C), % | 0.4 to 0.47 | |
0 |
Chromium (Cr), % | 0 | |
0.050 to 0.25 |
Copper (Cu), % | 0 | |
1.2 to 1.9 |
Iron (Fe), % | 98.4 to 98.9 | |
0 to 0.5 |
Magnesium (Mg), % | 0 | |
2.1 to 3.1 |
Manganese (Mn), % | 0.7 to 1.0 | |
0 to 0.5 |
Phosphorus (P), % | 0 to 0.040 | |
0 |
Silicon (Si), % | 0 | |
0 to 0.4 |
Sulfur (S), % | 0 to 0.050 | |
0 |
Titanium (Ti), % | 0 | |
0 to 0.25 |
Zinc (Zn), % | 0 | |
7.2 to 8.4 |
Zirconium (Zr), % | 0 | |
0 to 0.25 |
Residuals, % | 0 | |
0 to 0.15 |