MakeItFrom.com
Menu (ESC)

SAE-AISI 1043 Steel vs. EN AC-44000 Aluminum

SAE-AISI 1043 steel belongs to the iron alloys classification, while EN AC-44000 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1043 steel and the bottom bar is EN AC-44000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190 to 200
51
Elastic (Young's, Tensile) Modulus, GPa 190
71
Elongation at Break, % 13 to 18
7.3
Fatigue Strength, MPa 230 to 390
64
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
27
Tensile Strength: Ultimate (UTS), MPa 650 to 710
180
Tensile Strength: Yield (Proof), MPa 350 to 600
86

Thermal Properties

Latent Heat of Fusion, J/g 250
560
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
590
Melting Onset (Solidus), °C 1420
590
Specific Heat Capacity, J/kg-K 470
910
Thermal Conductivity, W/m-K 51
140
Thermal Expansion, µm/m-K 12
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
36
Electrical Conductivity: Equal Weight (Specific), % IACS 8.1
130

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
9.5
Density, g/cm3 7.8
2.5
Embodied Carbon, kg CO2/kg material 1.4
7.8
Embodied Energy, MJ/kg 18
150
Embodied Water, L/kg 46
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 87 to 100
11
Resilience: Unit (Modulus of Resilience), kJ/m3 320 to 980
51
Stiffness to Weight: Axial, points 13
16
Stiffness to Weight: Bending, points 24
55
Strength to Weight: Axial, points 23 to 25
20
Strength to Weight: Bending, points 21 to 22
28
Thermal Diffusivity, mm2/s 14
61
Thermal Shock Resistance, points 21 to 22
8.4

Alloy Composition

Aluminum (Al), % 0
87.1 to 90
Carbon (C), % 0.4 to 0.47
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 98.4 to 98.9
0 to 0.19
Magnesium (Mg), % 0
0 to 0.45
Manganese (Mn), % 0.7 to 1.0
0 to 0.1
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
10 to 11.8
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.070
Residuals, % 0
0 to 0.1